Thermo/Bicron MicroRem LE (Low Energy) Monthly Rental

$435.00
(No reviews yet) Write a Review

$435 monthly/$145 weekly

A one-time setup/calibration charge in addition to rental rate noted above may also apply. When this applies, you’ll be informed of the amount of the additional charge at time of order or, if requested, prior to placement of order.

  • 5 Ranges
  • Tissue-Equivalent Scintillator
  • Nearly Flat Energy Response
  • Photon response from 17 keV to 1.3 MeV
  • Measure environmental levels
  • 0-20 ?rem/h (0-0.2 ? Sv/h) on first range
  • 0 -200 mrem/h (2 mSv/h&n)

Radiation Detected:
Gamma and x-ray, 17 keV to 1.3 MeV

Detector:
Internal, tissue equivalent, organic scintillator

Accuracy:
Within 10% of reading for 137Cs between 20% and 100% of full scale on any range

Energy Response:
See energy response curve

High Voltage:
Electronically stabilized, factory set during calibration, with check band on the meter

Response Time:
Optimized for each range, 0-90% of final reading as follows:
Range: Time; X0.1 : <15 seconds; X1: <15 seconds; X10: <5 seconds; X100: <2 seconds; X1000: <2 seconds

Temperature:
Operational from -4°F to 122°F (-20°C to 50°C)

Humidity:
<5% change in reading from 10% to 95% RH

Battery Complement:
Two 9 volts

Battery Life:
>100 hours

Geotropism:
Within +2% of full scale

Shock:
100 g per lightweight machine of Mil-STD 202C, method 202B

Vibration:
5 g in each of three mutually orthogonal axes at one or more frequencies from 10-33 Hz

Meter Reset Button:
Allows meter to reset to "0" for repeat measurement

Display:
Ruggedized, recessed, high-torque 1 mA meter protected by impact resistant Lexan polycarbonate window with 3.35" (85.1 mm) scale marked:
Control: Eight position rotary switch: Off; Bat. (checks the condition of the batteries); HV (audits the detector high voltage): X1000, X100, X10, X1, X0.1 (counting ranges=multiply the meter reading by these figures)