F&J Model D-812 Monthly Rental

$234.00
(No reviews yet) Write a Review

$234 monthly/$78 weekly

Non-routine instrument setup and/or calibration requests will incur a one-time setup/calibration charge in addition to rental rate noted above.  When this applies, you’ll be informed of the amount of the additional charge at time of order or, if requested, prior to placement of order.

  • Calibrator comes with in-line adaptor with quick disconnect for the calibration of the LV-1's
  • Flow measuring device display's in CFM, LPM, and M3/min
  • Range of 0.5 - 4.0 CFM (14 - 115 LPM)
  • Flow rates are corrected to standard temperature and barometric pressure
  • Display of barometric pressure and temperature in English units

MEASUREMENT PRINCIPLE
Flow Sensor: 
Venturi Tube

Standardization: 
Correction for standard temperature and barometric pressure

Curve linearization: 
Individually calibrated and software corrected

MEASUREMENT RANGES
Range:
0.5 - 4.0 CFM (14 - 115 LPM)

Temperature:
-4° F - +122°F (-20°C – +50° C)

Barometric pressure:
30 – 24 In-Hg (760 – 609 mm-Hg) approx. Sea level to 6000 ft. elevation above sea level

MEASUREMENT ACCURACY
Air flow:
+/- 2% of full scale (Optional +/- 1% of full scale)

Temperature (Typical):
1°C over range -4° F - +122°F (-20°C – +50° C)

Barometric pressure:
+/- 1% over measurement range

DISPLAY:
6 Digit LCD 0.4" high

GENERAL INFORMATION

 
Power requirements: 100–120 VAC;50/60Hz  
  Operating temperature: -4° F - +122°F (-20°C – +50° C)
  Storage temperature: -20° F - +122°F -29°C – +70° C)
  Dimension (L×W×H) 9.75"×8.25"×10.75" (248×210×273mm)
  Weight: 8 lbs. 6 oz. (3.8 Kgs.)
  Installation Category: Pollution Degree 2  
  Enclosure Rating: IPXO