$93 monthly/$31 weekly
A one-time setup/calibration charge in addition to rental rate noted above may also apply. When this applies, you’ll be informed of the amount of the additional charge at time of order or, if requested, prior to placement of order.
- Rugged
- 5 Decade Analog Ratemeter
- Operates Two Detectors
- Built-In Internal GM Detector (0 - 2000 mR/hr)
- External GM or Scintillator Detector
COMPATIBLE DETECTORS:
G-M, scintillation
METER DIAL:
Typically 0 - 2 mR/hr and cpm, BAT TEST (others available)
MULTIPLIERS:
X0.1, X1, X10, X100, X1000
LINEARITY:
Reading within plus or minus 10% of true value with detector connected
CONNECTOR:
Series "C" (others available)
INTERNAL DETECTOR:
Energy compensated G-M (used with X1000 scale only)
ENERGY RESPONSE:
Within plus or minus 15% of true value between 60 keV - 3 MeV (internal detector only)
THRESHOLD:
40 mV ± 10 mV
AUDIO:
Built in unimorph speaker with ON/OFF switch (greater than 60 dB at 2 feet)
CALIBRATION CONTROLS:
Accessible from front of instrument (protective cover provided)
HIGH VOLTAGE:
900 volts
RESPONSE:
Toggle switch for FAST (4 seconds) or SLOW (22 seconds) from 10% to 90% of final reading
RESET:
Push-button to zero meter
POWER:
2 each "D" cell batteries (housed in an externally accessible sealed compartment)
BATTERY LIFE:
Typically greater than 2000 hrs.(battery condition can be checked on meter)
METER:
2.5" (6.4 cm) arc, 1 mA analog type
CONSTRUCTION:
Cast and drawn aluminum with beige polyurethane powder coating
TEMPERATURE RANGE:
-4° F(-20° C) to 122° F(50° C)
SIZE:
6.7" (17 cm)H X 4.0" (10.2 cm)W X 8.3" (21.1 cm)L including handle and source holder
WEIGHT:
3.5 lbs (1.6 kg) including batteries
